Ben Vang

Safe, Effective and quick Image Sensor Cleaning

Sensor Cleaning BrushesYou will spend less time editing out annoying dust spots on your digital images!

The German made D-SLR™ Brush features extra fine and soft filaments (hairs) which, when statically charged with an air blower, will pick up loose particles by lightly whisking across the sensor surface.

It has a 16mm wide brush area making it easy to use on any sensor size in any camera brand or model.

The brush is always our first, and frequently only, step needed in our workshop to clean loose dust from the image sensor filter surface. Below are small sections of test images ...

Before cleaning the sensor on a Nikon D2xFinal result after air and brush cleaning.

... the full size can be viewed on the Sensor Cleaning page!

The brush is supplied in a handy storage tube with full instruction for its use, care and feeding!
Cost only $33.-

 

Rocket Air BlowerGIOTTO ROCKET AIR BLOWER
A source of dry air is needed to charge the Sensor Brush filaments and the Giotto Rocket Air bulb is our recommended companion.

Canned air should NOT be used as propellant may be expelled from the can causing smearing of the sensor or brush, and worse by forcing dust in between the sensor and sensor filter.

The Giotto Rocket Air is a powerful ‘hand powered’ bulb type blower for safe dusting of all optics and sensors.

Cost $19.50 plus postage.

 

You can also add other products from the Care Products Page before checking out.
/i/bnr/horizontal_solution_PP.gif

 

(The postage charge $9.90 will be added when your check-out).
Further details on our WebShop entry page!

CAMERA CHECK POINT, P.O. Box 7078, Dubbo NSW 2830 Australia